Automotive APPLICATIONS Reactive Thermoplastic-based Composites

Reactive Thermoplastic-based Composites

OptiMold cure monitoring system is essential for the industrialisation of reactive thermoplastic-based composites

Thermoplastic composites are considered as the next generation of mass-produced structural materials for volume applications such as automotive. To avoid the high viscosity of standard thermoplastics, reactive thermoplastics (APA, CBT etc) are under development. However, their processing is complex and they are very sensitive to various parameters making their processing a real challenge for manufacturers.

Using our OptiMold technology, the reaction mouding can be fully monitored even at temperatures up to 230oC so the real-time optimisation of the injection and polymerisation is possible. Furthermore the build-up of crystallinity can be also traced during heating and cooling. Processing deviations such as the existence of moisture in the matrix or the increase of crystallinity can be picked up as can be shown in the graph and controlled accordingly.

Synthesites involved in three papers with DLR, NLR, NCC and Bombardier
to be presented at the forthcoming SAMPE Europe Conference in Nantes in September 2019.

Synthesites to participate in new aerospace R&D H2020 project
for advanced high temperature manufacturing in aerospace

Synthesites at the 18th European Conference on Composite Materials (ECCM18)
a collaboration between Synthesites and the National Composites Centre (NCC), UK